Hi Mark,
That code does correspond to HAR cable. There seems to be good information on the first page of the document here, though I can’t vouch for its complete accuracy: http://www.internationalconfig.com/Documents/2004Catalog/m.pdf >From the last time I looked into this, I believe that HD-21 and HD-22 have been replaced by EN 50395 and EN 50396. Perhaps someone more knowledgeable about the subject can confirm. Scott Aldous Compliance Engineer Advanced Energy Tel: 970-407-6872 Fax: 970-407-5872 ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Mark Schmidt Sent: Tuesday, October 20, 2009 8:06 AM To: [email protected] Subject: HAR Power Cord Hello All, I am trying to qualify a detachable HAR power cord/cable. The cable is imprinted with H05VV5-F and my research indicates that this cable type is covered by the HAR Agreement. My clarity on this subject ends here. Is a H05VV5-F (imprinted on the cable) cord equivalent to HAR? HAR is not marked on the cable. This cable is manufactured to VDE0821. Any help is appreciated. Best Regards, Mark This message, including any attachments, may contain information that is confidential and proprietary information of Advanced Energy Industries, Inc. The dissemination, distribution, use or copying of this message or any of its attachments is strictly prohibited without the express written consent of Advanced Energy Industries, Inc. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
