Hi Ed, That link seems to be inactive...try: http://nuwaves-ltd.com/
Ken Wyatt Technical Services, LLC 56 Aspen Dr. Woodland Park, CO 80863 Email: [email protected] Web: www.emc-seminars.com LinkedIn: http://www.linkedin.com/in/kennethwyatt (719) 310-5418 On Jun 17, 2009, at 7:21 AM, Price, Edward wrote: Not an ad; just a short product review. I recently bought a Nuwaves HILNAV1-C preamplifier that is customized for the 30 MHz to 1000 MHz range. (The standard HILNAV1 is half the price, but is rated only for 50 MHz to 1 GHz.) I characterized the gain and found that I got about 45 dB from 30 MHz to 100 MHz, with a nearly linear drop off to 35 dB at 1000 MHz. The great part is that all this gain also has a Noise Figure of less than 0.8 dB! The preamp will accept up to about -30 dBm before it starts saturating, and even 0 dBm doesn't cause spurious products. See http://www.nuwaves.com If you need a really hot preamp to help the sensitivity of you biconical or log periodic, this unit is a great choice. (I set mine up with a couple of Bias-T's, so that I could power the amp remotely through the coax and still place it at the antenna. I have some data sheets and construction photos if anyone is interested.) Total cost was $550 for the preamp and $150 for a couple of Mini Circuits Bias-T's, plus a couple of metal project boxes and a wall-wart from the junk pile. It beats the performance of my HP-8447A by 10 dB. Ed Price [email protected] <blocked::mailto:[email protected]> WB6WSN NARTE Certified EMC Engineer Electromagnetic Compatibility Lab Cubic Defense Applications San Diego, CA USA 858-505-2780 Military & Avionics EMC Is Our Specialty - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
