Reg, The FCC states in a "prominent location". This is open to interpretation, but I think all will agree that a prominent location would be where you have all the relevant regulatory notices (safety, emc environmental, etc.), typically in the beginning of the manual and befoire any operating instructions Peter Merguerian
--- On Thu, 5/14/09, Reginald Henry <[email protected]> wrote: From: Reginald Henry <[email protected]> Subject: LOCATION OF FCC EMISSIONS STATEMENT IN MANUAL ? To: [email protected] Date: Thursday, May 14, 2009, 10:26 AM All, Very simple question, can the FCC Statement be located anywhere within the tested product's manual, or is there a specific location designated by the FCC as where it should or shall be placed ? This equipment has been tested and complies with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, might cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Thanking you in advance for your input. Best Regards, Reg Henry Electrical Engineer FCC*CE*UL COMPLIANCE ENGINEERING <http://ad.doubleclick.net/click%3Bh=v /36da/3/0/%2a/f%3B202258726%3B0-0%3B0%3 19141241%3B21-88/31%3B26800612/26818469 1%3B%3B~okv%3D%3Btile%3D2%3Bdcopt%3Dist 3Bsz%3D88x31%3B~aopt%3D2/0/61/0%3B~sscs 3D%3fhttp://ad.n2434.doubleclick.net/clk;20379%20> Tel: (631) 952-2288 Ext: 310 Tel: (800) 645-9116 Ext: 310 Web: <http://www.vicon-cctv.com/> ________________________________ CONFIDENTIALITY NOTICE: This transmission may contain information that is privileged, confidential and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereof) is strictly prohibited. If you receive this transmission in error, please immediately contact the sender and destroy the material in it's entirety,whether in electronic or hard copy format. The views expressed in this communication may not necessarily be the views held by the company. Thank you. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
