All,
 
Very simple question, can the FCC Statement be located anywhere within the 
tested product's manual, or
is there a specific location designated by the FCC as where it should or shall 
be placed ?
 

This equipment has been tested and complies with the limits for a Class A 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed 
to provide reasonable protection against harmful interference when the 
equipment is operated in a commercial environment. This equipment generates, 
uses, and can radiate radio frequency energy and, if not installed and used in 
accordance with the instruction manual, might cause harmful interference to 
radio communications. Operation of this equipment in a residential area is 
likely to cause harmful interference, in which case the user will be required 
to correct the interference at his own expense.

Thanking  you in advance for your input.

 

Best Regards,

Reg Henry 

Electrical Engineer

FCC*CE*UL

COMPLIANCE ENGINEERING

<http://ad.doubleclick.net/click%3Bh=v8/36da/3/0/%2a/f%3B202258726%3B0-0%3B0%3B19141241%3B21-88/31%3B26800612/26818469/1%3B%3B~okv%3D%3Btile%3D2%3Bdcopt%3Dist%3Bsz%3D88x31%3B~aopt%3D2/0/61/0%3B~sscs%3D%3fhttp://ad.n2434.doubleclick.net/clk;20379%20>
 

Tel: (631) 952-2288    Ext: 310 
Tel: (800) 645-9116    Ext: 310 
Web:  <http://www.vicon-cctv.com/ <blocked::http://www.vicon-cctv.com/> >

 

 

 

 

________________________________

CONFIDENTIALITY NOTICE: This transmission may contain information that is 
privileged, confidential and/or exempt from disclosure
under applicable law. If you are not the intended recipient, you are hereby 
notified that any disclosure, copying, distribution, or use of the information 
contained herein (including any reliance thereof) is
strictly prohibited. If you receive this transmission in error, please 
immediately contact the sender and destroy the material in it's 
entirety,whether in electronic or hard copy format. The views expressed in this
communication may not necessarily be the views held by the company. 
Thank you. 



Reply via email to