EN 50419:2006 defines the minimum size of the wheelie bin logo so if you can't fit it on or it's not appropriate to apply it to the product itself then print it in the offered alternative place i.e. the packaging and or user instructions.
From: [email protected] [mailto:[email protected]] On Behalf Of Mark Schmidt Sent: 27 April 2009 21:53 To: Nick Williams; [email protected] Subject: RE: WEEE logo minimum product size Hello Nick, The WEEE DIRECTIVE 2002/96/EC - Annex IV says "The symbol must be printed visibly, legibly and indelibly". Regards, Mark From: [email protected] [mailto:[email protected]] On Behalf Of Nick Williams Sent: Monday, April 27, 2009 4:44 PM To: [email protected] Subject: WEEE logo minimum product size Is there a minimum size for a product below which is is not required for the WEEE logo to appear on the product itself? EN 50419:2006 simply says : "If the size or function of the product means that (the markings) cannot be applied..." but give no minimum dimension. Thanks and regards Nick. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> This message (including any attachments) may contain confidential information intended for a specific individual and purpose. If you are not the intended recipient, delete this message. If you are not the intended recipient, disclosing, copying, distributing, or taking any action based on this message is strictly prohibited. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
