All, Every few years I am asked this question.
When should the FCC Logo be applied to a product vs. the FCC Statement . As I recall if the product is... 1) Meant for commercial use 2) An unintentional radiator 3) tested to be verified ( results of tests NOT maintained by the FCC ) by an independent lab to meet the FCC requirements IF ALL ABOVE IT TRUE THEN... the FCC statement (should be applied to the product and the manual. PLEASE GIVE ME YOUR INPUT ON THIS ? Best Regards, Reg Henry Reginald Henry Electrical Engineer Tel: (631) 952-2288 Ext: 310 Tel: (800) 645-9116 Ext: 310 Web: <http://www.vicon-cctv.com/> CONFIDENTIALITY NOTICE: This transmission may contain information that is privileged, confidential and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereof) is strictly prohibited. If you receive this transmission in error, please immediately contact the sender and destroy the material in it's entirety,whether in electronic or hard copy format. The views expressed in this communication may not necessarily be the views held by the company. Thank you. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
