Dear list members,
One of our costumers is going to have his product tested according to IEC 61010 with all applicable national differences and getting CB certificate. The test lab doing the CB certification says that for Israel one of the national differences is that the EMC test has to be performed by a certain test lab (in fact the same as doing the CB). I have looked at the CB information on the IECEE and the Standards Institute of Israel websites and my impression is that there is no such requirement. Do you know of Israeli national differences for IEC 61010? Kind regards, Niels Hougaard Niels Hougaard Bolls Rådgivning Ved Gadekæret 11F DK-3660 Stenløse Denmark T: +45 48 18 35 66 F: +45 48 18 35 30 [email protected] www.bolls.dk <http://www.bolls.dk/> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
