Hi, If you plan to do any EMC testing in the chamber, I strongly suggest that you use a hatch panel / plate that you can replace easily. Using a tube to get cables through the screen end up compromising the screening, coupling the external environment into the chamber during emission tests and, equally, coupling the immunity environment to the outside world. Regards Tim
************************ Tim Haynes A1N10 Electromagnetic Engineering Specialist SELEX Sensors and Airborne Systems 300 Capability Green Luton LU1 3PG ( Tel : +44 (0)1582 886239 7 Fax : +44 (0)1582 795863 ) Mob : +44 (0)7703 559 310 * E-mail : [email protected] P Please consider the environment before printing this email. There are 10 types of people in the world-those who understand binary and those who don't. J. Paxman ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: 12 March 2009 22:34 To: [email protected] Subject: Chamber access *** WARNING *** This mail has originated outside your organization, either from an external partner or the Global Internet. Keep this in mind if you answer this message. Hello, We're upgrading our 3 meter chamber and would appreciate any suggestions you might have for running cables into the chamber from the support equipment. We have a wave guide and could put in a patch panel, but before we do that I would like to get some input from the group Thanks! Ken MacGrath _____________________________________________________________________ Core Compliance Testing Services, LLC 79 River Road (Route 3A) Hudson, NH 03051 Business: (603)889-5545 Cell: (603) 892-0620 Web: www.corecompliancetesting.com ________________________________ A Good Credit Score is 700 or Above. See yours in just 2 easy steps! <http://pr.atwola.com/promoclk/10012657 x1219671244x1201345076/aol?redir=http:% F%2Fwww.freecreditreport.com%2Fpm%2Fdef ult.aspx%3Fsc%3D668072%26hmpgID%3D62%26bcd%3DfebemailfooterNO62> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> SELEX Sensors and Airborne Systems Limited Registered Office: Sigma House, Christopher Martin Road, Basildon, Essex SS14 3EL A company registered in England & Wales. Company no. 02426132 ******************************************************************** This email and any attachments are confidential to the intended recipient and may also be privileged. If you are not the intended recipient please delete it from your system and notify the sender. You should not copy it or use it for any purpose nor disclose or distribute its contents to any other person. ******************************************************************** - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
