Wendy, You might check out the Beehive probe set. www.beehive-electronics.com
It's low cost and seems to work well. It was designed by an ex- engineer from Agilent Technologies. Be sure to purchase the SMB to SMA adapter kit, as all the probes have SMB connectors - kind of rare in the EMC world. The set of E and H-field probes runs about $300, as I recall. As Edward mentioned, both E- and H-field probes are very easy to make >from short pieces of semi-rigid coax. The smaller loops should be good up to the GHz range, but you may need a preamp to see useable signals. Regards, Ken Wyatt Technical Services, LLC 56 Aspen Dr. Woodland Park, CO 80863 Email: [email protected] Web: www.emc-seminars.com (719) 310-5418 (888) 212-4602 toll-free On Mar 11, 2009, at 11:45 PM, Wendy Nya wrote: > Dear Experts, > > My company is looking to buy a RF probe set for test bench > evaluation for radiated emission. Can someone give a good > recommendation? > > PS: I checked the Rohde & Schwarz model - the magnetic loops are too > thick and the price too high. > Thanks, > Wendy Nya > > > > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc- > pstc discussion list. To post a message to the list, send your e- > mail to <[email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc > Graphics (in well-used formats), large files, etc. can be posted to > that URL. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher: <[email protected]> > David Heald: <[email protected]> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
