Hi Jim,

Just be careful with the exercising equipment you use. I have seen a lot of Ethernet equipment that did not have very good balance and potentially cause a failure of either emissions or immunity unless you isolate it from the test electrically. For an example of such equipment take a look at:

http://emcesd.com/tt2011/tt080111.htm

Doug

On 12/27/11 4:04 PM, Knighten, Jim L wrote:
I am curious what means people are using to exercise Ethernet telecom ports when testing for conducted emissions according to CISPR 22 and conducted immunity according to CISPR 24?
 
Do you use an external piece of equipment (AE) to send Ethernet traffic?  If so, what do you use and do you like it?
 
My particular interest is 1000BaseT (gigabit Ethernet), but the question is more general.
 
Thanks in advance,
 
Jim
 
__________________________
 
James L. Knighten, Ph.D.
EMC Engineer
Teradata Corporation
17095 Via Del Campo
San Diego, CA 92127
 
858-485-2537 – phone
858-485-3788 – fax (unattended)
 
 
 
 
 
 
-
----------------------------------------------------------------

This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]>

All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html

Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc.

Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>

For policy questions, send mail to:
Jim Bacher <[email protected]>
David Heald <[email protected]>


-- 
-------------------------------------------------------
    ___          _       Doug Smith
     \          / )      P.O. Box 1457
      =========          Los Gatos, CA 95031-1457
   _ / \     / \ _       TEL/FAX: 408-356-4186/358-3799
 /  /\  \ ] /  /\  \     Mobile:  408-858-4528
|  q-----( )  |  o  |    Email:   [email protected]
 \ _ /    ]    \ _ /     Website: http://www.dsmith.org
-------------------------------------------------------

-
----------------------------------------------------------------

This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]>

All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html

Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc.

Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>

For policy questions, send mail to:
Jim Bacher <[email protected]>
David Heald <[email protected]>

Reply via email to