> Basis for rating info on label of consumer product based on regional
> electric code and marking requirement in scoped safety
> standard. Basis for
> rating on a component is to verify comformity. Note the rationale in
> 60950-1: "Equipment shall be provided with a power rating marking, the
> purpose of which is to specify a supply of correct voltage
> and frequency,
> and of adequate current-carrying capacity."
Doesn't answer my questions.
The plug provided with the equipment completely
answers the 60950-1 requirement without any
marking! The end-user installs the equipment
using the supplied plug, without reference to
the rating markings.
Rich
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
