Kevin et al, In my experience over the years, 120-240V indicates a universal input whereby the power supply is intended to operate at any voltage within that boundary (with tolerancing of course). And, 120/240V indicates that a power supply is intended to operate at only those 2 voltages(again with tolerancing), whereby voltage selection is either automatic via built-in auto-ranging circuitry or manually via a selector switch. If selection is by selector switch, the user must be cautioned/informed of the use of the switch for the safe operation of the device.
And I totally agree that the average consumer has no idea about such things, hence the need for the seemingly ubiquitous universal input nowadays and especially for consumer products (my opinion). IHTH. Best regards, Ron -----Original Message----- From: Jim Hulbert [mailto:[email protected]] Sent: Friday, January 27, 2012 8:40 AM To: [email protected] Subject: Re: [PSES] Is this common knowledge - Electrical Ratings It's probably common knowledge on THIS forum that 120-240V indicates an autoranging power supply and 120/240V indicates there is a switch setting for one or the other. I'll bet the average consumer has no idea, though. Jim Hulbert -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Kevin Robinson Sent: Friday, January 27, 2012 10:20 AM To: emc-pstc Subject: Is this common knowledge - Electrical Ratings Happy Friday everyone I am asking a question that I already know the answer to, but I am trying to determine if it is common knowledge or if it was something that I picked up along the way and have always accepted as being true. If you were to see a product with a marked electrical rating of 120/240 V and another product with a marked rating of 120-240V, what would be the difference between these two products? Would a user or operator need to do anything special with one or both of these products to use it at 120V or 240V? Thanks, Kevin Robinson OSHA - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
