In message <[email protected]>, dated Thu, 2 Feb
2012, Ed Price <[email protected]> writes:
But I wonder if it might not be easier, all things considered, for us
(especially the many of us who only need to do 80 MHz to 1000 MHz RI)
to just stick a set of four good low-pass filters (cut-offs at 160 MHz,
320 MHz, 640 MHz and 1000 MHz) into the amplifier output coax.
The insertion loss would have to be very low, otherwise the amplifier
would produce more distortion at the higher power required. But it might
work.
Filtered probes? No power loss problem there.
--
OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
Some people who are peeling the finch of the financial crisis are thinking of
biting a rook.
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
