Charlie
RTTE here . EMC, radio and LVD tests will be carried out, but we have only planned to do with EUT in 230VAC mode, since we're only doing CE mark for this EUT. #Amund Fra: Charlie Blackham [mailto:[email protected]] Sendt: 31. mai 2012 12:36 Til: amund; [email protected] Emne: RE: [PSES] SV: 120VAC in Europe? Amund Depends on Directive - Medical Devices covered by EN60601 have to have some tests done at both voltages. Regards Charlie From: Amund Westin [mailto:[email protected]] Sent: 31 May 2012 11:26 To: [email protected] Subject: [PSES] SV: 120VAC in Europe? So, for CE marking, 110-120VAC should be tested in addition to 230VAC? The EUT has a switch to choose 120VAC or 230VAC supply voltage. #Amund Fra: Nick Williams [mailto:[email protected]] Sendt: 31. mai 2012 12:18 Til: amund Kopi: [email protected] Emne: Re: 120VAC in Europe? 110V supplied from a centre tapped to earth isolating transformer is commonly used on construction and industrial sites in the UK. Nick. On 31 May 2012, at 11:07, Amund Westin wrote: Any country in EU who use 120VAC? I don't think so, but want to check with you guys .. #Amund - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
