You need to look at the DIRECTIVE to see whether it applies to your product - Standards are just a way of demonstrating compliance with a directive. The rules/requirements come from the Directive and the National Implementations thereof.
For many items that are covered by the machinery directive, compliance is through assessment of “Essential health and safety requirements relating to the design and construction of machinery” as detailed in Annex I and standards such as 61010 may be used to demonstrate compliance with some parts of this Annex. (Only) six type of equipment are excluded from the scope of the MSD as per article 1 (2) (k): - household appliances intended for domestic use, - audio and video equipment, - information technology equipment, - ordinary office machinery, - low-voltage switchgear and control gear, - electric motors; Further information at: http://ec.europa.eu/enterprise/sectors/mechanical/documents/legislation/machinery/index_en.htm Regards Charlie Charlie Blackham Sulis Consultants Ltd Tel: +44 (0)7946 624317 Web: www.sulisconsultants.com<http://www.sulisconsultants.com/> Registered in England and Wales, number 05466247 From: ce-test, qualified testing bv - Gert Gremmen [mailto:[email protected]] Sent: 07 June 2012 09:44 To: [email protected] Subject: Re: [PSES] Laboratory Equipment - the forgotten child Some background At http://ec.europa.eu/enterprise/policies/european-standards/harmonised-standards/machinery/index_en.htm you will find the list of harmonized standards for the machine directive. Currently listed for electrical safety aspects are 60745 Electrical Tools 60335 Household equipment 60204 Electrical equipment of machines. None of these standards suit laboratory equipment. Many standards are targeted to a specific type of machine, but not to laboratory equipment. No other standards are concerned with laboratory equipment nor is this category excluded in article 1.2(k) and exclusion 2.2(h) is meant for temporary laboratory equipment only. I think that the EC must consider notifying EN 61010 under the Machinery directive, ( requires a risk analysis to be carried out) , or exclude Laboratory equipment from the MD. I think the first solution will be chosen. Look also here for general access and information to ce marking and the misc directives. http://ec.europa.eu/enterprise/policies/single-market-goods/cemarking/professionals/manufacturers/directives/index_en.htm Regards, Ing. Gert Gremmen, BSc [email protected]<mailto:[email protected]> www.cetest.nl Kiotoweg 363 3047 BG Rotterdam T 31(0)104152426 F 31(0)104154953 . Van: [email protected] [mailto:[email protected]] Namens Cortland Richmond Verzonden: Wednesday, June 06, 2012 5:31 PM Aan: [email protected] Onderwerp: Re: Laboratory Equipment - the forgotten child I looked up TUEV's Korean Web site (in English) at http://www.tuv.or.kr/Data/BM54/Technical%20Bulletin-1Q2010%280%29.pdf It says in part (excerpt): New publication of Harmonized Standards in the Official Journal of the EU under new Machinery Directive 2006-42-EC 새로운 기계류 지침 2006-42-EC에 따른 적용 규격 (Harmonized Standards)이 EU의 Official Journal에 공표. Relevant for: Machinery, Household equipment, Tools, Cleaning equipment, Laboratory equipment Shortly before introduction of the new machinery directive in 2006/42/EC on the 29.12.2009, the European Commission published the list of the Harmonized Standards of the new directive in the Official Journal of European Union on 18.12.2009 (See arrangement, the CENELEC part begins on the page 35). That may let you find (I don't have access to the standards) what they are (probably) misunderstanding. Good luck! Cortland Richmond On 6/1/2012 1627, Kunde, Brian wrote: More trouble in the world of Laboratory Equipment (red headed step child) and the Machinery Directive. I’ve had TUV offices in 3 Asian countries and a customer in Australia tell us our products (Laboratory Equipment) must have an AC Lock Out Device, an Emergency Stop Switch, and a Light Tower because “Laboratory Equipment now falls under the Machinery Directive”. They are telling us that any AC product requires a lock out device. What? On one instrument we make, the only moving part is a small dc motor with a wire brush similar to an electric tooth brush that cleans an electrical contact between .. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
