Auto-ranging rules! J (or else the insurance company!)
-----Original Message----- From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Aldous, Scott Sent: 05 July 2012 16:55 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: RE: Interview Questions Bolivia has a 50Hz grid, but some parts of the country operate at 110V while other parts operate at 220V. There is some mixing of the 2 voltages in some areas. I was in a room in La Paz where one side of the room was 110V and the other side was 220V, with the same type of receptacles and no markings! Scott Aldous Compliance Engineer AE Solar Energy +1.970.492.2065 Direct +1.970.407.5872 Fax +1.541.312.3832 Main <mailto:scott.ald...@aei.com> scott.ald...@aei.com 1625 Sharp Point Drive Fort Collins, CO 80525 <http://www.advanced-energy.com/solarenergy> www.advanced-energy.com/solarenergy -----Original Message----- From: <mailto:emc-p...@ieee.org> emc-p...@ieee.org <mailto:[mailto:emc-p...@ieee.org]> [mailto:emc-p...@ieee.org] On Behalf Of Andrew McCallum Sent: Wednesday, July 04, 2012 1:10 AM To: <mailto:EMC-PSTC@LISTSERV.IEEE.ORG> EMC-PSTC@LISTSERV.IEEE.ORG Subject: RE: Interview Questions The UK railway signalling system all runs at 110 V AC 50 HZ Andy -----Original Message----- From: John Woodgate <mailto:[mailto:j...@jmwa.demon.co.uk]> [mailto:j...@jmwa.demon.co.uk] Sent: 03 July 2012 21:17 To: <mailto:EMC-PSTC@LISTSERV.IEEE.ORG> EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: Interview Questions In message < <mailto:CAKEabA3B=iqyzpyjzmb5tjdewp+eowdq40fu9dh88oah6a1...@mail.gmail.com> CAKEabA3B=iqyzpyjzmb5tjdewp+eowdq40fu9dh88oah6a1...@mail.gmail.com>, dated Tue, 3 Jul 2012, IBM Ken < <mailto:ibm...@gmail.com> ibm...@gmail.com> writes: >PS: Who operates at 110VAC 50Hz? Portable equipment used on construction sites; it's actually 55-0-55, with the centre grounded. -- OOO - Own Opinions Only. Try <http://www.jmwa.demon.co.uk> www.jmwa.demon.co.uk and <http://www.isce.org.uk> www.isce.org.uk Instead of saying that the government is doing too little, too late or too much, too early, say they've got is exactly right, thus throwing them into total confusion. John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to < <mailto:emc-p...@ieee.org> emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: <http://www.ieee-pses.org/emc-pstc.html> http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at <http://product-compliance.oc.ieee.org/> http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: <http://www.ieee-pses.org/> http://www.ieee-pses.org/ Instructions: <http://listserv.ieee.org/request/user-guide.html> http://listserv.ieee.org/request/user-guide.html List rules: <http://www.ieee-pses.org/listrules.html> http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas < <mailto:emcp...@radiusnorth.net> emcp...@radiusnorth.net> Mike Cantwell < <mailto:mcantw...@ieee.org> mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: < <mailto:j.bac...@ieee.org> j.bac...@ieee.org> David Heald: < <mailto:dhe...@gmail.com> dhe...@gmail.com> Confidentiality: This e-mail and its attachments are intended for the addressees only (or people authorised to receive them on their behalf) and may be confidential or privileged. If they have come to you in error you must take no action based on them, nor must you copy or show them to anyone; please delete them from your system and reply to this e mail highlighting the error. Security: Please note that this e-mail has been created in the knowledge that internet e-mail is not 100% secure. Anyone who communicates with us by e-mail is taken to accept this. Viruses: We have taken steps to ensure that this e-mail and attachments are virus free, but we advise that in keeping with good computing practice you should ensure that they are actually virus free. DeltaRail Group Limited registered office Hudson House, 2 Hudson Way, Pride Park, Derby, DE24 8HS. Registered in England and Wales, number 5839985. Please refer to <http://www.deltarail.com> www.deltarail.com - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to < <mailto:emc-p...@ieee.org> emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: <http://www.ieee-pses.org/emc-pstc.html> http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at <http://product-compliance.oc.ieee.org/> http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: <http://www.ieee-pses.org/> http://www.ieee-pses.org/ Instructions: <http://listserv.ieee.org/request/user-guide.html> http://listserv.ieee.org/request/user-guide.html List rules: <http://www.ieee-pses.org/listrules.html> http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas < <mailto:emcp...@radiusnorth.net> emcp...@radiusnorth.net> Mike Cantwell < <mailto:mcantw...@ieee.org> mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: < <mailto:j.bac...@ieee.org> j.bac...@ieee.org> David Heald: < <mailto:dhe...@gmail.com> dhe...@gmail.com> This message, including any attachments, may contain information that is confidential and proprietary information of Advanced Energy Industries, Inc. The dissemination, distribution, use or copying of this message or any of its attachments is strictly prohibited without the express written consent of Advanced Energy Industries, Inc. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to < <mailto:emc-p...@ieee.org> emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: <http://www.ieee-pses.org/emc-pstc.html> http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at <http://product-compliance.oc.ieee.org/> http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: <http://www.ieee-pses.org/> http://www.ieee-pses.org/ Instructions: <http://listserv.ieee.org/request/user-guide.html> http://listserv.ieee.org/request/user-guide.html List rules: <http://www.ieee-pses.org/listrules.html> http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas < <mailto:emcp...@radiusnorth.net> emcp...@radiusnorth.net> Mike Cantwell < <mailto:mcantw...@ieee.org> mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: < <mailto:j.bac...@ieee.org> j.bac...@ieee.org> David Heald: < <mailto:dhe...@gmail.com> dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
