Amund There's guidance on integrating "assessed" radio modules into products at http://www.rtteca.com/TGN01Rev5.pdf
Basically, you may well be able to "carry forward" the RF spectrum compliance of the module, subject to meeting some criteria, but you will need to assess the finished product for EMC and safety Regards Charlie -----Original Message----- From: amund [mailto:[email protected]] Sent: 12 October 2012 12:24 To: [email protected] Subject: [PSES] CE+CE ... Consider a radio system under development (radiomodule, SMPS, hard disk, main board, etc) All parts in the system are COST (and CE marked) and the main work is now an engineering job and make some SW. When system is functioning and ready for putting it on the marked, the complete RTTE approval must be carried out, even though that all modules are CE marked. No other outcome, agree? #Amund - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
