Hi Tom, Thanks. I checked FW Bell web site and their models 8010 and 8030 cover only up to 50 kHz. I will call them to find out if they have any model which supports 250 kHz range.
Regards Ravinder Ajmani HGST, a Western Digital company [email protected] Thomas Cokenias <[email protected]> 01/04/2013 09:15 AM To [email protected] cc <[email protected]> Subject Re: Looking for Gaussmeter for measurements up to 250 kHz Hi Ravinder Try F.W. Bell, recently bought by Meggitt PLC. I saw a probe there that goes DC - 450 kHz, but you should contact them with your specific requirements since they have many combinations of frequency range and sensitivity. http://fwbell.com/default.aspx Good luck. best regards Tom On Jan 4, 2013, at 8:55 AM, [email protected] wrote: Hello Experts, I am looking for a Gaussmeter to measure DC and AC magnetic fields up to 250 kHz. I have tried searching on line but am unable to find one which covers such high frequency. I will appreciate any help in finding the source for Gaussmeter. Thanks. Regards Ravinder Ajmani HGST, a Western Digital company [email protected] - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to < [email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
