Hi,
what are the key differences to the European EMCD, LVD requirements? Which documents are required? CB test report will be accepted? Is the KC mark mandatory for lab. equipment? Is a local rep. mandatory? Any other local characteristics? The product is EN 61010-1/EN 61326-1 tested/approved and CE marked equipment. Best regards Dipl.-Ing. Michael Loerzer Managing Director Regulatory Affairs Specialist Globalnorm GmbH Kurfürstenstr. 112 10787 Berlin Phone +49 30 3229027-51 Cell +49 170 3229027 Fax +49 30 3229027-59 Mail <mailto:[email protected]> [email protected] <http://www.globalnorm.de/> » globalnorm.de Globalnorm GmbH, Sitz der Gesellschaft: Kurfürstenstr. 112, 10787 Berlin Geschäftsführer: Dipl.-Ing. Michael Loerzer Amtsgericht Berlin-Charlottenburg HRB 105204 B, USt-ID-Nummer: DE251654448 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
