In message <[email protected]>, dated Mon, 29
Apr 2013, Carl Newton <[email protected]> writes:
Still, customer?s NRTL2 is demanding that this test be repeated upon
100% of the power supplies at customer?s premises.
I don't know 'custom and practice' in USA, but I would expect that
requirement to apply in Europe. There is a minute but finite probability
that the insulation could be compromised in transit or within the
customer's premises. The dielectric strength test is therefore applied
after the *last manufacturing operation*.
--
OOO - Own Opinions Only. See www.jmwa.demon.co.uk
They took me to a specialist burns unit - and made me learn 'To a haggis'.
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
