Power plugs for Australian/New Zealand cord-connected equipment must comply with AS/NZS 3112.
QUESTION: does the approval number (e.g., "V100063") need to be molded onto or otherwise marked on the plug? This is not required by clause 2.12.1 in my old, 2000 copy of AZ/NZS 3112, but it looks like the standard has been updated since 2000. Thanks! Mike Sherman Product Safety and Compliance Engineer [email protected] - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
