In message
<1421038395.1290798.1373925947564.javamail.r...@sz0110a.emeryville.ca.mai
l.comcast.net>, dated Mon, 15 Jul 2013, [email protected] writes:
QUESTION: does the approval number (e.g., "V100063") need to be molded
onto or otherwise marked on the plug? This is not required by clause
2.12.1 in my old, 2000 copy of AZ/NZS 3112, but it looks like the
standard has been updated since 2000.
The standard was revised in 2004 and again in 2011. There is no
substitute for having the current version.
--
OOO - Own Opinions Only. See www.jmwa.demon.co.uk
Why is the stapler always empty just when you want it?
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
