In message <[email protected]>,
dated Mon, 22 Jul 2013, "Gartman, W. Richard" <[email protected]> writes:
· New product: current is SWB-11, new product is SWB-12 = Design
changes to product
SWB-11 and SWB-12 are different models.
· New production run of product: SWB-11 production lot ABC,
SWB-11 production lot 123 = No Design changes to product
SWB-11 is the same model in both runs, since nothing was changed.
How could that not be so?
--
OOO - Own Opinions Only. See www.jmwa.demon.co.uk
Why is the stapler always empty just when you want it?
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
