In message <F5B74858AAFC4C929D1E6F81869E1EA0@ComputerNo11>, dated Fri, 6
Sep 2013, Doug Powell <[email protected]> writes:
Best to simply use a glass or ceramic spark gaps which are inorganic
and cannot produce carbon when arced
You are right: using PCB tracks is to invite tracking! A slot in the
board with electrodes on both sides is better. These were used on CRT
base PCBs for many years with no significant problems.
--
OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk
If dictionaries were correct, we would only need one, because they would all
give the same information.
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
