Kim:
It is usually best to start out in EMC testing by taking your device to a local test lab and watching very closely what they do, how they do it, and what they use. After you see it up close once, then you can determine if you really want to develop the internal expertise and hardware to do this on your own. Many times, you can use generic test equipment to do a credible engineering (or pre-test) evaluation, if that's all you really need. Ed Price WB6WSN Chula Vista, CA USA From: Youngsik Kim [mailto:[email protected]] Sent: Wednesday, September 11, 2013 5:44 PM To: [email protected] Subject: [PSES] question: emc test equipment(for IEC 61800-3 immunity test) Hi, group I plan to measure the servo motor for emc test so i looking for a device that can be to measure the Immunity in IEC 61800-3 is a relevant standard Measurement immunity items is; - commutation nothes (IEC 60146-1-1) - Harmonics ralating to IEC 61000-2-4 - Voltage changes, dips, fluctuation, and interruptiong relating to IEC 61000-2-1 - etc Please tell me if you know equipment manufacturers. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
