Correct. However it should be noted that IEC 60601-1-2, 4th edition will be sent out in the next few weeks for final vote. Many changes (some very significant) are being proposed so stay tuned. We expect to know the outcome of the voting by early February.
Darryl Darryl P. Ray iNarte Certified Master EMC Design Engineer EMC Engineer Manager Covidien Respiratory & Monitoring Solutions Business Unit 2101 Faraday Carlsbad, CA 92009 [email protected]<mailto:[email protected]> 760-603-5882 (Office) 760-208-0805 (Mobile) From: McInturff, Gary [mailto:[email protected]] Sent: Monday, November 25, 2013 11:16 AM To: [email protected] Subject: [PSES] medical emc changes for 60601-2 3rd edition I don't believe there were any significant changes when the EMC portion of the generic medical standard was changes - limits, tests et all remained the same etc. It was primarily updating to change with 60601-1 generic safety correct? Gary McInturff Reliability/Compliance Engineer Esterline Interface Technologies Featuring ADVANCED INPUT, GAMESMAN, LRE MEDICAL, and MEMTRON products 600 W. Wilbur Avenue Coeur d'Alene, ID 83815-9496 Toll Free: 800-444-5923 X1XXX Tel: (208) 635-8 Fax: (208) 635-8 www.esterline.com/interfacetechnologies<http://www.esterline.com/interfacetechnologies> Technology, Innovation, Performance... "Information in or attached to this e-mail message may be subject to export control restrictions of the International Traffic in Arms Regulations (ITAR) (22 CFR pts. 120-130) or the Export Administration Regulations (EAR) (15 CFR pts. 730-774). Before exporting this information outside the United States or releasing it to a foreign person in the United States, you need to determine whether a license under the EAR or the ITAR is required to do so. If you have any questions about this obligation, please contact me." Click here<http://www.esterline.com/governance/email_disclaimer/tabid/1532/Default.aspx> to read disclaimer - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
