In message <[email protected]>,
dated Sat, 7 Dec 2013, Derek Walton <[email protected]> writes:
In the meantime, can anyone make suggestions about what may cause this
noise, besides parasitic oscillations/faulty parts, and what radiating
mechanisms can be uninfluenced with the protection measures I took.
You **seem** to have covered all the angles, but we must conclude that
you haven't. Are you QUITE sure about the absence of ambient? Will the
chip makers proudly confirm that they 'improved' on or more of the
devices? Did you try another spectrum analyser?
--
OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk
Nondum ex silvis sumus
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
