Not really practical above a few KHz or so. Above that parasitic capacitance grounds at lots of points. For audio it works but for high speed electronics not so much
Gary -----Original Message----- From: John Woodgate [mailto:[email protected]] Sent: Thursday, December 19, 2013 12:29 PM To: [email protected] Subject: Re: [PSES] EMC Puzzle update In message <[email protected]>, dated Thu, 19 Dec 2013, Derek Walton <[email protected]> writes: >I am not a proponent of having all planes tied together, only ever seen >disasters that way. If you allow circuit currents to deliberately on >inadvertently flow in the chassis it becomes a nightmare to control >them. Planes that are intended to be at zero-voltage reference potential should meet at ONE point only. That way no unwanted sharing or stealing of currents occurs. Including in a stack a plane carrying stuff from the 'chassis' seems most unwise. -- OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk Nondum ex silvis sumus John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
