That is basically correct if the secondary is accessible to the operator. If the secondary circuit is not accessible to the operator then Basic is allowed. Refer to Annex D for all the different combinations and situations.
The Test Voltages for solid insulation is found in section 6.7.2.2.1 table 5. For 230V AC Mains, the test voltage for Reinforced is 3000Vrms or 4200Vdc (1500Vrms or 2100Vdc for Basic). The Other Brian From: ce-test, qualified testing bv - Gert Gremmen [mailto:[email protected]] Sent: Monday, January 06, 2014 3:43 PM To: [email protected] Subject: [PSES] EN 61010 Hello Collegues, Best wishes from Rotterdam for the year to come to all of you ! Am I right in concluding that EN 61010 does not allow a Class I instrument to have a basic insulation between mains and secondary , but actually requires a reinforced (3500 Vac HiPot) insulation in all cases ?? If I am wrong, where to find the right clause ??? Regards, Ing. Gert Gremmen, BSc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> ________________________________ LECO Corporation Notice: This communication may contain confidential information intended for the named recipient(s) only. If you received this by mistake, please destroy it and notify us of the error. Thank you. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
