I believe the intention is that the content of Article 49 "Transposition" of the RED 2014/53/EU should also be transposed [from the Directive] into each member state's national law
In a recent meeting (July 2014) of the EU Commission TCAM group, a clarification on this subject was requested from the EU commission, and the following comment was made to the meeting - it is not a verbatim quote from the EU TCAM Chair. I am waiting for formal minutes of the meeting from the EU Commission which will be circulated to the R&TTE CA membership. "Member States shall apply the provisions of the RED from 16 June 2016 (even though certain Member States may adopt it earlier), and not before. Therefore, the situation will not arise where some Member States would have adopted the RED and others not." I also understand ETSI and CISPR have (at least draft) mandates from the EU to update the standards in light of the changes, such as receiver performance requirements, within the new RED, I expected these updates [to meet the requirements of the RED] will take many months. Regards Nick Hooper R&TTE CA Chairman http://www.rtteca.com/ and I agree with John Woodgate -"OOO - Own Opinions Only" -----Original Message----- From: John Woodgate [mailto:[email protected]] Sent: 31 July 2014 20:53 To: [email protected] Subject: Re: [PSES] 802.11a (5GHz WiFi) requires CE Alert sign, right? In message <6ea35dc06888465d8cb4cb752f5ef...@blupr03mb119.namprd03.prod.outlook.com> , dated Thu, 31 Jul 2014, "Crane, Lauren" <[email protected]> writes: >I think the above means the RED is in transition and you may choose to >follow it vs. the RTTED. The RED cannot be used until at least one EU Member State has adopted it into national law. I don't know whether this has happened yet. -- OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk Quid faciamus nisi sit? John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> This e-mail may contain privileged or confidential information. If you are not the intended recipient: (1) you may not disclose, use, distribute, copy or rely upon this message or attachment(s); and (2) please notify the sender by reply e-mail, and then delete this message and its attachment(s). Underwriters Laboratories Inc. and its affiliates disclaim all liability for any errors, omissions, corruption or virus in this message or any attachments. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
