In message
<bn3pr0801mb097975e6ec7a2ac52715156c85...@bn3pr0801mb0979.namprd08.prod.o
utlook.com>, dated Mon, 16 Mar 2015, "Nyffenegger, Dave"
<[email protected]> writes:
But there are some products that require a certification? from an NB
like saws and weighing instruments in addition to the manufacturer
claiming compliance.
I don't think anyone denied that. The claim is still the sole
responsibility of the manufacturer.
Article 8 2) of the LVD says that if challenged, a manufacturer can
submit a report from an NB. Clearly, the manufacturer can, and prudently
should if no standard is applicable, obtain such a report before any
challenge is made.
--
OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk
When I turn my back on the sun, it's to look for a rainbow
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
