It will be important to check the extent to which you have, or have not, incorporated all the components and materials which are normally required to be CSA Accepted/UL Recognized because, if you have not, then you could face very high initial component approval, and then on-going follow-up services, costs - for example: using "plastic" materials (e.g. the case & the PWBs) that meet the Flammability requirements of 62368-1/60065 but which are not ""UL/CSA" is going to cost you a lot in both the short and the long terms, as well as potentially delaying your CSAus/cUL Listing!
This sort of problem has been the undoing of many attempts to get products into N.America over the years! John Allen W.London, UK From: Amund Westin [mailto:[email protected]] Sent: 05 May 2015 08:18 To: [email protected] Subject: [PSES] CSA/cUL Certification Product: Multimedia (audio/video) powered by 12V battery or AC/DC adapter. Before even start making an approach towards CSA and UL, are there any important technical issues that should be addressed before getting on? I mean, the product is finished developed (for Europe market) and maybe a kind of quick check will point out if CSA/cUL Certification is possible at all . Thanks. Best regards Amund - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
