Chuck, I would expect only to see the applicable standards listed in the lab test report that they tested to. I don't see directives listed in my lab test reports. The DoC should identify the applicable directives and the standards used to support compliance with the directives. An EU Customs official wouldn't normally be looking at your test reports unless there is a formal request for the technical file. The lab test reports shouldn't accompany the product shipment/paper work.
-Dave From: Chuck McDowell [mailto:[email protected]] Sent: Monday, June 15, 2015 3:03 PM To: [email protected] Subject: [PSES] EU Customs and EMC test report Dear Compliance Professionals, Does a EMC test report issued by a accredited testing laboratory need to also reference the current EMC Directive 2004/108/EC? My belief is that the EMC Directive needs to noted on the product Declaration of Conformity, and not in the EMC test report. Is this correct? A EU Customs official stop a shipment because the EMC Directive noted in the EMC test report was out-of-date. I would like to remove EMC Directive dated notations from future reports. Thank you in advance for your comments, Chuck McDowell Compliance Specialist Meyer Sound Laboratories Inc. 2832 San Pablo Ave. Berkeley, CA 94702-2204 Phone 510-486-1166 Ext. 270 Fax 510-486-8356 Email [email protected]<mailto:[email protected]> NOTICE: This email may contain confidential information. Please see http://www.meyersound.com/confidential/ for our complete policy. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
