Happens to me all the time. Gert
-----Oorspronkelijk bericht----- Van: Nyffenegger, Dave [mailto:[email protected]] Verzonden: dinsdag 21 juli 2015 19:31 Aan: [email protected] Onderwerp: Re: [PSES] EU Machinery directive scope for in-house use Thanks, I'll take a look. I assume you are referring to the GUIDELINES ON THE APPLICATION OF DIRECTIVE 2006/95/EC (Last Modified: January 2012). On another subject- I don't know if it's just me or is anyone else noticing some strange behavior with the delivery of the mail to the EMC-PSTC list? I received this email from Lauren 5 minutes before I received the copy of the email I originated. thanks -Dave -----Original Message----- From: Crane, Lauren [mailto:[email protected]] Sent: Tuesday, July 21, 2015 1:25 PM To: Nyffenegger, Dave; [email protected] Subject: RE: EU Machinery directive scope for in-house use Dave, The MD applies to equipment "put into service" even for own use. The Commission's MD guide contains a lot of explanation about this concept. Regards, Lauren Crane KLA-Tencor -----Original Message----- From: Nyffenegger, Dave [mailto:[email protected]] Sent: Tuesday, July 21, 2015 12:14 PM To: [email protected] Subject: [PSES] EU Machinery directive scope for in-house use Folks, I'm trying to determine requirements and responsibilities in the EU if an end user/large business creates their own machinery for in-house use incorporating partly-completed machinery from other OEMs with corresponding DoIs. Does the Machinery Directive even apply for equipment that is assembled for in-house use or only to equipment manufactured and sold to another user? Or are there other directives that would apply that the business would be responsible for instead of the MD? Is there anything that states an end user/business cannot act as the "manufacturer" defined in the MD assuming all responsibilities? In the US OSHA laws would govern what the end user is responsible for. Anyone have any experience with this sort of thing? Thanks David P. Nyffenegger, PMP, SM-IEEE Product Development Manager - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
