Pulse duty ratio must be important too. I've often seen Pk measurements 5 or 6dB higher than QP. _______________________________________________________________________________
Ralph McDiarmid | Schneider Electric | Solar Business | CANADA | Regulatory Compliance Engineering From: Ken Wyatt <[email protected]> To: [email protected], Date: 10/19/2015 03:49 PM Subject: Re: [PSES] QP Dectector - how to confirm accuracy & functionality Hi Chas, Might be a bit pricy, but the AET USDS spherical comb gen has a pulsed feature that can check QP detectors. See my review: http://www.edn.com/electronics-blogs/the-emc-blog/4439682/Review--The-AET-USDS-spherical-harmonic-comb-generator Alternatively, if you can find an RF generator with pulse modulation, set it to 2 Hz and the comparison between the sine (CW) signal with peak detection and the pulsed signal in QP detection should be about 3 dB lower. Put another way, a sine wave signal with either peak or QP detection should read the same. With the pulsed signal the QP detector will read lower by about 3 dB. Ken _______________________ I'm here to help you succeed! Feel free to call or email with any questions related to EMC or EMI troubleshooting - at no obligation. I'm always happy to help! Kenneth Wyatt Wyatt Technical Services LLC 56 Aspen Dr. Woodland Park, CO 80863 Phone: (719) 310-5418 Email Me! | Web Site | Blog The EMC Blog (EDN) Subscribe to Newsletter Connect with me on LinkedIn On Oct 19, 2015, at 3:17 PM, Grasso, Charles <[email protected]> wrote: Hello, Does anyone know of a gizmo or procedure that provides a standard signal for checking the accuracy of a QP detector in a SA? Thanks in advance!! Best Regards Charles Grasso Compliance Engineer Echostar Communications (w) 303-706-5467 (c) 303-204-2974 (t) [email protected] (e) [email protected] (e2) [email protected] - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to < [email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> ______________________________________________________________________ This email has been scanned by the Symantec Email Security.cloud service. ______________________________________________________________________ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to < [email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
