At my workplace, we've got one of these: https://www.rohde-schwarz.com/product/esrp-productstartpage_63493-35077.html and it's pretty nice. Especially its huge dictionary of GPIB remote-control commands, which makes interfacing with LabVIEW convenient. R&S makes good products. However, I have never used nor seen the one you linked to. I noticed no mention anywhere of FFT/time-domain scanning on the page or the brochure (it'd be mentioned if it was a feature). That is a HUGE weak point IMO, if measurement time is at all important. There is no CISPR-Average scanning either, though RMS is probably similar enough. Are you trying to find something that's relatively inexpensive? Because it may be worth considering the expenses from the time costs as well. Time-domain scanning can make something that'd take several hours take only a few minutes, or possibly seconds (depending on context). If you stick to peak scans, it may not be so bad. It'll look noisier than quasi-peak, but that's okay since it's better to err on the side of less noise.
-Elliott -----Original Message----- From: Amund Westin [mailto:[email protected]] Sent: Friday, January 08, 2016 2:05 AM To: [email protected] Subject: [PSES] pre-compliance spectrum analyzer Sorry for incorrect subject ... I'll try again: ------------------- Looking for a pre-compliance spectrum analyzer for in-house checking. Found this one from R&S. http://value.rohde-schwarz.com/vi/value/spectrum-analyzers/hms-spectrum-analyzer.html Anyone who have used this one? Regards Amund - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
