Good morning
I'm not at all an expert of marine equipment safety, but here are a few comments: - Annex I of the Marine Equipment Directive (and its predecessor) calls for the Wheelmark, and not the CE marking. Therefore you could check out the Notified Bodies for that Directive. - As for other equipment, I think it might be that equipment safety is also addressed more by the relevant maritime classification societies (Lloyds Register of Shipping, Det Norske Veritas, American Bureau of Shipping, Germanische Lloyd, etc) as they are ones that effectively permit what can and cannot be installed on the ships which they register and insure. So you might want to check some of those out as well because they might allow the "normal" equipment safety standards to be used but with additional modifications to deal with the more severe maritime environmental conditions. - One standard that does seem to come up a lot is IEC/EN 60945 "Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results" John Allen W.London, UK From: John Allen [mailto:[email protected]] Sent: 02 February 2016 00:12 To: [email protected] Subject: [PSES] Marine Equipment for CE Hi, I found the Marine Equipment Directive 2014/90/EU. For Standards it refers to IMO Standards. In searching through the IMO Standards, they seem to be more guidelines for how to use equipment vs evaluating the equipment for safety, etc. Any guidance in finding Standards for Marine Equipment would be appreciated. Best Regards, John Allen - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
