Amund
Hmmm, as I understand it, the exemption you refer to originates in the New Legislative Framework realignment with reference to provisions in Decision No 768/2008/EC <http://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32008D0768> Article 4 Conformity assessment procedures 4. For custom-made products and small series production, the technical and administrative conditions relating to conformity assessment procedures shall be alleviated. These exemptions are discussed in the guide to the LVD and draft guide to the RED, but not in the RoHS2 FAQ. The rules on what is and what is not a "custom-built evaluation kit" are reasonably tight, but the product meets the requirements, it should be exempt from all CE marking, though it is of course not exempt from "being safe" regards Charlie ________________________________ From: Amund Westin <[email protected]> Sent: 02 February 2017 07:54 To: [email protected] Subject: [PSES] DoC when exempted from RED 2014/53/EU Radio equipment not covered by RED 2014/53/EU as Custom-built evaluation kits destined for professionals (Annex I), should they have a Declaration of Conformity? They are exempted from RED, but I would assume ROHS apply. In such a case, should a DoC only cover ROHS listing? I can not find any discussion about such situation in the Blue Guide. Best regards Amund - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
