Hi Folks Does anyone have experience generating 1.7A CW (10KHz - 400MHz) using Bulk Current Injection?
Wondering how people have achieved it, is there a BCI on the market able to sustain this level "off the shelf" or a vendor who custom builds them? A possible alternative was to use multiple BCI's and a Power Splitter, but I can see this problematic at higher frequencies due to wavelength/phase etc I realise that you would need separate BCI's, splitting the test into frequency bands as no one BCI could do it all Thanks for any help provided Rich - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
