Rich
AS far as I am aware there is only one Bulk Current Injection Probe available
for doing high level injection.
It was origonally designed by a Mr Dave Herke at Qinetiq and sold through
Schaffner Chase, later Teseq.
The probe in question is a CIP-9136A. These are made to order.
There are hex screws in the eternal case of the probe which can be removed and
connection to forced air cooling which will be reqired for this and higher
level to prevent damage to the core.
I do believe it is possible to hire them as well from places such as EMC-Hire
UK.
Hope this helps
Regards
Andy
Andrew Price
Land & Naval Defence Electronics Division
Prinicpal Environmental Engineer (EMC)
Leonardo MW Ltd
Sigma House, Christopher Martin Rd, Basildon SS14 3EL, UK
Tel EMC LAB : +44 (0)1268 883308
Mobile: +44 (0)7507 854888
[email protected]<mailto:[email protected]>
leonardocomapany.com
HELICOPTERS / AERONAUTICS / ELECTRONICS, DEFENCE AND SECURITY SYSTEMS / SPACE
* Please consider the environment before printing this email.
Leonardo MW Ltd
Registered Office: Sigma House, Christopher Martin Road, Basildon, Essex SS14
3EL
A company registered in England & Wales. Company no. 02426132
********************************************************************
This email and any attachments are confidential to the intended
recipient and may also be privileged. If you are not the intended
recipient please delete it from your system and notify the sender.
You should not copy it or use it for any purpose nor disclose or
distribute its contents to any other person.
********************************************************************
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
