This would be consistent with the way other Directives and regulations are applied under the EU New Approach.
-- Doug Nix [email protected] (519) 729-5704 "Our greatest weakness lies in giving up. The most certain way to succeed is always to try just one more time." - Thomas Edison > On 28-Jun-17, at 14:59, Gert Gremmen <[email protected]> wrote: > > As far as I understand: > > Use EMCD HS for EM aspects art 3.1 (No NB needed) ; that includes the 301 > 489 series for EMC of auxiliary equipment (intentionally left out of RED > should never have been on the RTTE list either as it was EMC) > Use LVD HS for electrical safety also art 3.1 (No NB Needed) > Use RED HS for radio Art 3.2 (No NB needed) (radio properties / spurious > emissions: those are not EMI, but strictly harmonics and mixer products) > > This ends the confusion there always was on EMC standards and LVD standards > in the RTTE list, > > From the beginning one was supposed to use 3 directives for Radio products > > There are still missing red standards, notably those for (GPS) Receivers, > here a NB is needed, but as there is no standard > available, what will the NB have to impose ? > > Gert Gremmen > > > > Van: Michael Derby [mailto:[email protected] > <mailto:[email protected]>] > Verzonden: woensdag 28 juni 2017 20:04 > Aan: [email protected] <mailto:[email protected]> > Onderwerp: Re: [PSES] RED Harmonised Standards > > I think they’ve been putting all their effort into getting the Article 3.2 > standards onto the OJ as soon as they can (because those are the ones which > the manufacturer needs, to self declare without a Notified Body). > > Most of the EN 301 489 standards are published or at least in a final draft; > so the manufacturer can use them and explain it in their risk assessment. > It may not be on the RED OJ, but that does not mandate the use of a Notified > Body. > > > Michael. > > > From: Paasche, Dieter [mailto:[email protected] > <mailto:[email protected]>] > Sent: 28 June 2017 16:22 > To: [email protected] <mailto:[email protected]> > Subject: Re: [PSES] RED Harmonised Standards > > > Interesting. One additional question is I don’t see any of the 301 489 > series. Is this going to be published in the RED harmonized standards list, > as it is strictly speaking and EMC requirement, or is this part of the > article 3.1 b requirement:” an adequate level of electromagnetic > compatibility as set out in Directive 2014/30/EU.?” > The EMC directive only lists 301 489-1 and 301 489-34. > > > > Sincerely, > > Dieter Paasche > Senior Product Developer, Electrical > CHRISTIE > 809 Wellington Street North > Kitchener, ON N2G 4Y7 > Phone: 519-744-8005 ext.7211 > www.christiedigital.com <http://www.christiedigital.com/> > > This e-mail message (including attachments, if any) is confidential. Any > unauthorized use, distribution or disclosure is prohibited. If you have > received this e-mail message in error, please notify the sender by reply > e-mail or telephone and delete it and any attachments from your computer > system and records. > > From: Douglas Nix [mailto:[email protected] <mailto:[email protected]>] > Sent: Tuesday, June 27, 2017 2:27 PM > To: [email protected] <mailto:[email protected]> > Subject: [PSES] RED Harmonised Standards > > Colleagues, > > I just heard about a new Communication and list of Harmonised Standards under > the RED: > > http://eur-lex.europa.eu/legal-content/EN/TXT/?uri=uriserv:OJ.C_.2017.180.01.0005.01.ENG&toc=OJ:C:2017:180:TOC > > <http://eur-lex.europa.eu/legal-content/EN/TXT/?uri=uriserv:OJ.C_.2017.180.01.0005.01.ENG&toc=OJ:C:2017:180:TOC> > > -- > Doug Nix > [email protected] <mailto:[email protected]> > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected] <mailto:[email protected]>> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > <http://www.ieee-pses.org/emc-pstc.html> > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ > <http://product-compliance.oc.ieee.org/> can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ <http://www.ieee-pses.org/> > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > <http://www.ieee-pses.org/listrules.html> > For help, send mail to the list administrators: > Scott Douglas <[email protected] <mailto:[email protected]>> > Mike Cantwell <[email protected] <mailto:[email protected]>> > > For policy questions, send mail to: > Jim Bacher <[email protected] <mailto:[email protected]>> > David Heald <[email protected] <mailto:[email protected]>> > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected] <mailto:[email protected]>> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > <http://www.ieee-pses.org/emc-pstc.html> > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ > <http://product-compliance.oc.ieee.org/> can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ <http://www.ieee-pses.org/> > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > <http://www.ieee-pses.org/listrules.html> > For help, send mail to the list administrators: > Scott Douglas <[email protected] <mailto:[email protected]>> > Mike Cantwell <[email protected] <mailto:[email protected]>> > > For policy questions, send mail to: > Jim Bacher <[email protected] <mailto:[email protected]>> > David Heald <[email protected] <mailto:[email protected]>> > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected] <mailto:[email protected]>> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > <http://www.ieee-pses.org/emc-pstc.html> > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ > <http://product-compliance.oc.ieee.org/> can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ <http://www.ieee-pses.org/> > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > <http://www.ieee-pses.org/listrules.html> > For help, send mail to the list administrators: > Scott Douglas <[email protected] <mailto:[email protected]>> > Mike Cantwell <[email protected] <mailto:[email protected]>> > > For policy questions, send mail to: > Jim Bacher <[email protected] <mailto:[email protected]>> > David Heald <[email protected] <mailto:[email protected]>> > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected] <mailto:[email protected]>> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > <http://www.ieee-pses.org/emc-pstc.html> > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ > <http://product-compliance.oc.ieee.org/> can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ <http://www.ieee-pses.org/> > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > <http://www.ieee-pses.org/listrules.html> > For help, send mail to the list administrators: > Scott Douglas <[email protected] <mailto:[email protected]>> > Mike Cantwell <[email protected] <mailto:[email protected]>> > > For policy questions, send mail to: > Jim Bacher <[email protected] <mailto:[email protected]>> > David Heald <[email protected] <mailto:[email protected]>> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
