If you have a transmitter-only device, then you can use EN 300 440-2 V1.4.1 and avoid the use of a Notified Body.
However, if you have a receiver-only or transceiver device; you will need a Notified Body because the standard does not give presumption of conformity to the Directive (effectively, the receiver parts aren’t on the OJ). At least, that’s my understanding of it. Michael. From: Mark Bailey [mailto:[email protected]] Sent: 28 June 2017 20:45 To: [email protected] Subject: Re: [PSES] RED Harmonised Standards ETSI EN 300 440-2 V1.4.1 is in the OJ, can this be used as a harmonised standard for GPS article 3.2? Beneath the listing it says “This harmonised standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.” So it IS a harmonised standard (no requirement for EU type approval examination if applied in full) but it doesn’t give a presumption of conformity (manufacturer may be required to do additional testing to ensure receiver parameters meet article 3.2 requirements?). Mark Bailey From: Gert Gremmen [mailto:[email protected] <mailto:[email protected]> ] Sent: 28 June 2017 19:59 To: [email protected] <mailto:[email protected]> Subject: Re: [PSES] RED Harmonised Standards As far as I understand: Use EMCD HS for EM aspects art 3.1 (No NB needed) ; that includes the 301 489 series for EMC of auxiliary equipment (intentionally left out of RED should never have been on the RTTE list either as it was EMC) Use LVD HS for electrical safety also art 3.1 (No NB Needed) Use RED HS for radio Art 3.2 (No NB needed) (radio properties / spurious emissions: those are not EMI, but strictly harmonics and mixer products) This ends the confusion there always was on EMC standards and LVD standards in the RTTE list, >From the beginning one was supposed to use 3 directives for Radio products There are still missing red standards, notably those for (GPS) Receivers, here a NB is needed, but as there is no standard available, what will the NB have to impose ? Gert Gremmen Van: Michael Derby [mailto:[email protected]] Verzonden: woensdag 28 juni 2017 20:04 Aan: [email protected] <mailto:[email protected]> Onderwerp: Re: [PSES] RED Harmonised Standards I think they’ve been putting all their effort into getting the Article 3.2 standards onto the OJ as soon as they can (because those are the ones which the manufacturer needs, to self declare without a Notified Body). Most of the EN 301 489 standards are published or at least in a final draft; so the manufacturer can use them and explain it in their risk assessment. It may not be on the RED OJ, but that does not mandate the use of a Notified Body. Michael. From: Paasche, Dieter [mailto:[email protected]] Sent: 28 June 2017 16:22 To: [email protected] <mailto:[email protected]> Subject: Re: [PSES] RED Harmonised Standards Interesting. One additional question is I don’t see any of the 301 489 series. Is this going to be published in the RED harmonized standards list, as it is strictly speaking and EMC requirement, or is this part of the article 3.1 b requirement:” an adequate level of electromagnetic compatibility as set out in Directive 2014/30/EU.?” The EMC directive only lists 301 489-1 and 301 489-34. Sincerely, Dieter Paasche Senior Product Developer, Electrical CHRISTIE 809 Wellington Street North Kitchener, ON N2G 4Y7 Phone: 519-744-8005 ext.7211 www.christiedigital.com <http://www.christiedigital.com/> This e-mail message (including attachments, if any) is confidential. Any unauthorized use, distribution or disclosure is prohibited. If you have received this e-mail message in error, please notify the sender by reply e-mail or telephone and delete it and any attachments from your computer system and records. From: Douglas Nix [mailto:[email protected]] Sent: Tuesday, June 27, 2017 2:27 PM To: [email protected] <mailto:[email protected]> Subject: [PSES] RED Harmonised Standards Colleagues, I just heard about a new Communication and list of Harmonised Standards under the RED: http://eur-lex.europa.eu/legal-content/EN/TXT/?uri=uriserv:OJ.C_.2017.180.01.0005.01.ENG <http://eur-lex.europa.eu/legal-content/EN/TXT/?uri=uriserv:OJ.C_.2017.180.01.0005.01.ENG&toc=OJ:C:2017:180:TOC> &toc=OJ:C:2017:180:TOC -- Doug Nix [email protected] <mailto:[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected] <mailto:[email protected]> > Mike Cantwell <[email protected] <mailto:[email protected]> > For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected] <mailto:[email protected]> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected] <mailto:[email protected]> > Mike Cantwell <[email protected] <mailto:[email protected]> > For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected] <mailto:[email protected]> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected] <mailto:[email protected]> > Mike Cantwell <[email protected] <mailto:[email protected]> > For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected] <mailto:[email protected]> > Mike Cantwell <[email protected] <mailto:[email protected]> > For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected] <mailto:[email protected]> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected] <mailto:[email protected]> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected] <mailto:[email protected]> > Mike Cantwell <[email protected] <mailto:[email protected]> > For policy questions, send mail to: Jim Bacher <[email protected] <mailto:[email protected]> > David Heald <[email protected] <mailto:[email protected]> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
