Hi John, Agree!
Regards, Scott On 22/7/2017, 12:42 AM, "John Woodgate" <[email protected]> wrote: The manufacturer must document what has been done that is better than what was required by the defective standard, preferably including test results that prove it is better. This documentation is precisely intended to convince the market surveillance authorities. With best wishes DESIGN IT IN! OOO – Own Opinions Only www.jmwa.demon.co.uk J M Woodgate and Associates Rayleigh England Sylvae in aeternum manent. -----Original Message----- From: Scott Xe [mailto:[email protected]] Sent: 21 July 2017 17:12 To: [email protected] Subject: Re: [PSES] Harmonised standard withdrawn [60335-2-24] Hi Chuck, Thanks for your guidance! The source is useful to know the reason(s) of objection. It will leave the supplier how to tackle those issues. How can the market surveillance determine the adequate level of acceptance? Regards, Scott On 20/7/2017, 10:49 PM, "Chuck Seyboldt" <[email protected]> wrote: Find the reason for the withdrawal, and adapt inspection to account for that. Even short of withdrawal, it is prudent to keep abreast of objections to standards. Formal Objection against EN 60335-2-24:2010 Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers https://ec.europa.eu/docsroom/documents/19502 For other objections, see this URL ... http://ec.europa.eu/growth/single-market/european-standards/notification-system_en Chuck Seyboldt (207) 893-0352 (207) 838-4026 Cellular (800) 893-8142 Facsimile At 10:37 (-0000) on 17.07.20, Scott Xe wrote: > The harmonised standard EN 60335-2-24 is removed from the > harmonised standard list on OJEU. The common compliance route > of self-declaration of conformity to LVD using harmonised > standard becomes lost. What are other options to demonstrating > the compliance with LVD? > > > > Thanks and regards, > > > > Scott > > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a > message to the list, send your e-mail to <[email protected]> > > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher <[email protected]> > David Heald <[email protected]> > > > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
