Is the Teseq software still around? I had quite an extensive library of routines built up using their software years ago.
______________________________________________________ Dan Roman, N.C.E. Senior Member IEEE Product Safety Engineering Society <mailto:[email protected]> mailto:[email protected] From: James Pawson (U3C) [mailto:[email protected]] Sent: Tuesday, August 01, 2017 8:41 AM To: [email protected] Subject: [PSES] EMC Measurement Software Hello group, I'm investigating upgrades to my existing EMC measurement software (R&S ESXS-K1) and have found the following options: * R&S Elektra (new) / ES-Scan / EMC32 * Dare RadiMation * Toyo EMC measurement software * ETS Lindgren TILE! * Nexio BAT-EMC * NI LabView and develop own routines * Write own from scratch (VB / C#) Are there any others worth considering? What "gotchas" or issues am I likely to run into? It needs to drive a R&S ESHS 10 (conducted) and a ESVS 10 (radiated). Bonus points for support for R&S FSP 30 and custom turntable control. Many thanks in advance! James James Pawson Unit 3 Compliance - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
