Dear Experts, In the IEC 61726:2015 standard: Screening Attenuation measurement by the reverberation chamber (RC) method; Section 6.1 concerning the shape of the RC states that 'A perfect cubic shape should be avoided for optimum performance at lower frequencies'. However, I have read in an article that none of the RC dimensions should be equal or multiple of each other.
Is there any concerns for a reverb chamber with two equal dimensions, let's say 3.0m long x 3.0m wide x 2.4m high? Thank you, Egide Murisa EMI/EMC Engineer, Test - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
