A radio module is tested and certified according to EN 300 328 and RED.
The module is then installed in an end-product, but with another antenna
than was used under the module test and certification process.
A notified body now asks for a new Radiated Spurious Emission test
beacuse of the new antenna. I find that proposal understandable.
But is this requirement (or recommendation) form the notified body, is
it described in any ETSI report or other formal document?
Best regards
Amund
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
