Both VMWare and college CS/engineering intern are good recommendations in my opinion.
Here's a MATLAB code sample for the DIY 61000-4-7 route (not checked for correctness, but see the 'Functions' tab): https://www.mathworks.com/matlabcentral/fileexchange/43496-iec-61000-4-7-for-harmonics-calculations Cheers, Adam in Atlanta On Wed, Dec 20, 2017 at 5:19 PM, Ralph McDiarmid < ralph.mcdiar...@schneider-electric.com> wrote: > A co-op computer science student on a work term would probably wrestle > that to the ground in short order. > > Ralph McDiarmid > Product Compliance > Engineering > Solar Business > Schneider Electric > > > From: John Woodgate [mailto:j...@woodjohn.uk] > Sent: Wednesday, December 20, 2017 1:26 PM > To: EMC-PSTC@LISTSERV.IEEE.ORG > Subject: Re: [PSES] CI Software Flicker/Harmonics > > SECOND RESPONSE > I see you asked about writing software. The math involved in IEC 61000-4-7 > and IEC 61000-4-15 is incredibly complicated. Of course, it could be > re-coded, but it would be a major undertaking. The Block 5 math of > 61000-4-15 is in fact under review at present, not for the first time. > John Woodgate OOO-Own Opinions Only > J M Woodgate and Associates http://www.woodjohn.uk > Rayleigh, Essex UK > On 2017-12-20 21:13, Kunde, Brian wrote: > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to < > emc-p...@ieee.org> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <sdoug...@ieee.org> > Mike Cantwell <mcantw...@ieee.org> > > For policy questions, send mail to: > Jim Bacher: <j.bac...@ieee.org> > David Heald: <dhe...@gmail.com> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>