Sorry, I forgot about the attachments. I think the best way to go is for
anyone who wants them to ask Mathieu by email.
John Woodgate OOO-Own Opinions Only
J M Woodgate and Associates www.woodjohn.uk
Rayleigh, Essex UK
On 2017-12-21 16:08, John Woodgate wrote:
I asked Mathieu van den Bergh of CNS, who knows about this in depth.
Here is his response, which I have permission to quote.
QUOTE
/Ametek Cal. Inst. offers software that runs under Windows-7 //*(both
32 and 64 bit).*//So does Teseq (they sell the same system under the
Teseq brand. Note that the CTS and WIN2100V3 version 3.2.0.35 were
released in 2012 and are operating mostly on Windows 7 (64 bit)
computers since that time. There are 2 versions of this software, one
for XP the other for W-7.//
////
//In fact, your contact can download the Cal. Inst. CTS version
//*4.17 *//(runs under XP as well as W-7) software from the Ametek web
site. CTS4 installs in parallel to the existing CTS Version 3.x. and
uses the same cal file, so upgrade does not require new
calibration.This is actually stated on the web site.//
////
////http://www.programmablepower.com/ac-power-source/CTS/Downloads.htm//
////
////*Also, Windows-7 software for both - the CTS and also the Teseq
Profline version can be downloaded from my web site*//
////
////http://www.cnspoway.com///
////
//I will post WIN2100V4 version 4.17 shortly on my software download
page ( I have 4.14 on there now). Teseq also has WIN2100V4 available
for download from their web site.//
////
//I can also answer positively to the other question. Yes, I have
developed a stand-alone (small) box that has a USB interface. The box
can either interface to an existing PACS or CCN1000 unit, or it can
fully replace the California Instruments / Teseq measurement unit. I
attach a couple documents with screen shots and a sample test report. //
////
//The software for the new product is supported / owned / copy righted
by CNS Inc./
John Woodgate OOO-Own Opinions Only
J M Woodgate and Associateswww.woodjohn.uk
Rayleigh, Essex UK
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <emc-p...@ieee.org>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <sdoug...@ieee.org>
Mike Cantwell <mcantw...@ieee.org>
For policy questions, send mail to:
Jim Bacher: <j.bac...@ieee.org>
David Heald: <dhe...@gmail.com>
