There is a simple equation for the axial field at the center of the loop as a function of distance from the loop, the loop radius, and of course, current. Current will depend on the impedance, and that in turn depends on loop inductance, which will depend on radius. The radius isn¹t listed below, but you could use the MIL-STD-461 CS114, RTCA/DO-160 section 20 or automotive BCI spec (can¹t recall the number now) fixture to hold a current probe that measures the current induced in the fixture when driven by a 50 ohm source.
Then you would have all the info necessary to calculate the axial field at a distance the loop center. Ken Javor Phone: (256) 650-5261 From: Amund Westin <[email protected]> Reply-To: Amund Westin <[email protected]> Date: Fri, 12 Oct 2018 06:15:01 +0200 To: <[email protected]> Subject: [PSES] Loop antenna theory I¹m looking for some good and practical loop antenna theory. Have a RF signal of +40dBm @ 100MHz and a self-made 1 turn semi-rigid coax loop with inner lead soldered to the shield. Theory (or rule of thumb) about the generated fields from such antenna are welcome. Will use this loop antenna under RF immunity troubleshooting. Thanks. BR Amund - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
