Hi Charlie:
Is there a clause/requirement in 61010-1 similar to 60950-1 clause 2.1.1.5
where a SELV source >240 VA is not permitted to be accessible in an Operator
Area
I could not find this requirement in 61010-1, 3rd edition.
The 240 VA requirement does not insure safety due to overheating of an
external conductor such as metal necklace or watchband or screwdriver across
the 240 VA per 60950-1. Tests were done by the Japanese contingent to TC108
that very much less than 240 VA would cause unacceptable overheating.
Best regard,
Rich
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]>
For policy questions, send mail to:
Jim Bacher: <[email protected]>
David Heald: <[email protected]>
